I wanted to share with you the conclusions and insights after few days of the device operation. KangerTech ProTank BCC (Bottom coil changeable) is made of very solid materials, chrome-plated steel and Pyrex tube. Pyrex is a borosilicate glass (8% of boron trioxide and 85% of silicon monoxide) used for laboratory glassware due to its properties (one doesn\u2019t have to worry it comes into reaction with more invasive flavours).<\/p>\n
ProTank_4<\/p>\n
Basic information:
\n– Thread type: 510
\n– Capacity: 2.5 ml
\n– Length: 65 mm (without thread)
\n– Diameter: 18 mm
\n– Resistance: 1.8, 2.4 ohm (changeable heater)
\n– Housing type: chrome-plated steel, glass \u201cpyrex\u201d<\/p>\n
ProTank_head_2<\/p>\n
Advantages:
\nPolished, sealed, simple design.
\nNo leaks.
\nEasy to assemble and resolve.
\nQuick and hassle-free heater replacement.
\nThe ability to use heaters with different resistance.
\nVery well, superbly indeed captures the taste.
\nNo extraneous flavours: rubber, plastic etc.
\nThe tank made of Pyrex glass (resistant to alkaline solutions, some organic and inorganic acids).
\nNo problems with delivery of liquid (BCC).
\nNegligible or even total lack of condensate.
\nThe real capacity approx. 2.5 ml.
\nWarm and nice vapour.
\nLarge amount of vapour.
\nTrouble-free, cheap in use.
\nGood flow of high density e-liquid.
\nWorks with lots of batteries, from the eGo up to all sorts of fashion.<\/p>\n
Disadvantage:
\nInability to use different drips,
\nFall-sensitive glass.<\/p>\n
ProTank_2<\/p>\n
Impressions:
\nWhile using other types of clearolmizers one can feel flat paper taste, in case of almost all types \u2013 the waft of plastic, but there is no such problem with this device! Actually it\u2019s ok to vap without any flavour! Warm vapour and the taste is very, very distinct.<\/p>\n
Flavour deliver is so good, that sometimes I have a feeling it even too good. Especially at the first test I left a few ml of coffee flavour e-liquid. ProTank BCC as one of the few delivered really acceptable taste. The rest of cartomizers, many clearomizers, tank and all the rest didn\u2019t deliver as good taste as I have now. They were far worse!<\/p>\n
vamo v2<\/p>\n
Using this device flavours in homemade mixtures should be carefully dosed. Some part of e-smokers apply large doses of flavours. I think this group of people might be nicely surprised. For testing purpose I flooded mixture of 70% Glycol, 30% Glycerine + 4 drops of MTS Vape Wizard per 10 ml of base without adding any flavour. During vapping I felt very strong taste of MTS. In case of other evaporators I completely didn\u2019t feel it. Now I know that in next productions I must to approach the subject of mixtures in completely different way. In case of Tank system I added 8 up to even 10 drops of flavour to 10ml of base, but I could reach satisfying effect, I thought perhaps there was something wrong with my taste buds. With this wonder vipping is a pure pleasure. Of course, one might forget about leaks.<\/p>\n
Further I noticed only vestigial amounts of condensate! Metallic drip, which is integrated with a glass tank, was heating up to temperature close to body temperature. Probably the higher temperature of the metal drip causes smaller quantities of condensate. During evaporation of the entire contents of the tank I had only once wipe the seal. With such a simple design of ProTank cleaning is just a snap. We do not need to empty the tank and waste e-liquid, if we need to purge a ProTank. Simply unscrew the evaporator from the battery, turn the end with thread to the top position, and then unscrew the ring with heater. Unscrew the ring and the heater, you can rinse it with running water, or wipe it with tissue. With a bit of practice, you can do it while going by bus, provided that you\u2019re not a bus driver.<\/p>\n
ProTank works perfectly with alternating current batteries as well as with direct current batteries. The set includes decorative ring, whose main function is to gain the fastening the evaporator to eGo batteries. ProTank along with the decorative ring mounded to a small eGo-C looks really interesting.<\/p>\n
ProTank_eGo-C<\/p>\n
Summary:
\nI smoke like crazy \u2013 nonstop, I cannot take my mug off it throughout the day. I don\u2019t have any problems with the evaporator (cleazomizer). It works stably, the capacity remains a constant level in full range. This device is worth its price! I\u2019ve been waiting for something like this for a long time. Such a small thing, and so much joy.<\/p>\n","protected":false},"excerpt":{"rendered":"
I wanted to share with you the conclusions and insights after few days of the device operation. KangerTech ProTank BCC (Bottom coil changeable) is made of very solid materials, chrome-plated steel and Pyrex tube. Pyrex is a borosilicate glass (8% of boron trioxide and 85% of silicon monoxide) used for laboratory glassware due to its … <\/p>\n